Learning Forum

[Timothy Satriya Budiono]

im modeling a speaker but when i put material assignment of air at enclosure there is error and i dont found any solution related with harmonic response. can some one help me?

[Erik Kostson]

 

 

Hi

To run acoustics you need a native harmonic acoustic system (see image below) not a harm. response + act acoustic extension (you should not use this extension use the native system).

See here for a tutorial on how to run harmonic acoustics:

https://www.youtube.com/watch?v=M_4-H7wEPAk

All the best

Erik

 

 

[Timothy Satriya Budiono]

there is video use harmonic response and act acoustics but many steps are missing. is it because old version ansys or something else?

link: https://www.youtube.com/watch?v=yDfyA0CKa38

[Erik Kostson]

 

Hi

Yes we will try and remove that video as it is very old (R15) and we are not using the act extension anymore.

To run acoustics say in 2023 R1 you are using, you need the native harmonic acoustic system (see image below).

See here for a tutorial on how to run harmonic acoustics:

https://www.youtube.com/watch?v=LMavMC4Zt6A

https://www.youtube.com/watch?v=M_4-H7wEPAk

All the best

Erik