problem applying bearing load

- June 23, 2019 at 10:02 pm
  
  user2058
  Subscriber
  
  I'm trying to follow the "Fatigue Analysis of a Formula SAE Hub" tutorial.
  
  I have modeled, meshed, and applied fixed support and moment load (figure3).
  
  I am unable to apply a bearing load to the part following the tutorial by vganore (@ time 5:15 in the video).
  (I can't reply on the forum post because the thread is locked, /forum/forums/topic/fsae-baja-video-tutorials/)
  
  Once I've selected all the surfaces, the "bearing load" feature becomes inactive (figure 1 and 2).
  
  Following the tutorial step-by-step I not sure what to do to overcome this problem.
  
  figure 1 below
  
  figure 2 below
  
  figure 3 below
  
  ANSYS workbench 19.2 student license.