Problem Ansys CFX simulation

- July 14, 2021 at 11:05 am
  
  ssharma
  Subscriber
- July 14, 2021 at 11:13 am
  
  Amine Ben Hadj Ali
  Ansys Employee
  
  Your screenshot is not helpful. Add further details about the issue you are encountering. In which part does the error occur in the out.file?
- July 14, 2021 at 11:17 am
  
  ssharma
  Subscriber
  
  Actually, the problem is coming in CFX solver. After taking the mesh it directly through out with the error code 255.
- July 14, 2021 at 5:57 pm
  
  ssharma
  Subscriber
  
  Dear Amine
  I have tried to run the same definition file in another system and where it runs successfully and no error comes
  I also reinstall the Ansys but still getting the same error.