-
-
November 20, 2024 at 1:57 am
sjp1012
SubscriberIn ansys maxwell 3D, the permanent magnet motor is modeled, and the hairpin winding is used to draw the skindepth grid of the solid conductor. The conductor size is 3.5*1.5. When the number of grid layers is small, it does not show the skin effect. But it is difficult to draw when the grid is too dense, and the three-phase solidloss is asymmetric.
-
December 5, 2024 at 8:58 pm
MirandaH
Ansys Employeewhat is the operating frequency? -
December 6, 2024 at 1:43 pm
sjp1012
SubscriberWe use 243Hz. And for our PMSM, the max value is 1000Hz.
-
Viewing 2 reply threads
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- Y wiring method and the start and end points of winding.
- Lumped Port Deembed
- Optimizing Via Impedance in Ansys HFSS 3D Layout Using Geometric Parameter Sweep
- Hfss 3D pcb via capped and filled with epoxy
- AEDT Natural Convection with default correlation is failing solver initializatio
- HFSS libnvidia-ml.so too old or could not be found – Warning in slurm job output
- Three-Phase Voltage Imbalances in dual stator electric generator
- STL Import Errors in HFSS After Cleaning in SpaceClaim
- Calc Error in Field Calculator after PyAEDT Analyze
- import file autocad 3d
Top Contributors
-
3882
-
1414
-
1241
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.