3D Design

3D Design

Topics related to Ansys Discovery and Ansys SpaceClaim.
  1. All Channels
  2. 3D Design
  3. Parametric studies Discovery in Workbench

Parametric studies Discovery in Workbench

TAGGED: , , ,

    • July 26, 2021 at 6:54 am
      peter.farkas
      Subscriber
      Dear Support, it is possible in 2021R2 to connect discovery to WB, with input parameters. Is it possible to create output parameters to evaluate parametric results with design explorer or optislang?   Thanks for your reply in advance.
    • July 26, 2021 at 9:28 am
      Charudatta Bandgar
      Subscriber

      Hello Farkas Peter

      Let me look into this, I will get back to you.

      Regards

      • July 27, 2021 at 4:38 am
        Charudatta Bandgar
        Subscriber

        Hello Farkas Peter

        That is not yet possible.

        Regards.

Viewing 1 reply thread
  • The topic ‘Parametric studies Discovery in Workbench’ is closed to new replies.
Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.