TAGGED: -Ansys-Maxwell-electronics
-
-
September 28, 2023 at 11:21 am
-
October 2, 2023 at 6:11 pm
GLUO
Ansys EmployeeHello,
I cannot see a winding in the circuit. Isn't this an external circuit for Maxwell design?
Please make sure the pulse voltage sources have the correct phase shift and a peak voltage greater than Von.
GL
-
Viewing 1 reply thread
- The topic ‘one phase inverter’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- Y wiring method and the start and end points of winding.
- Lumped Port Deembed
- Optimizing Via Impedance in Ansys HFSS 3D Layout Using Geometric Parameter Sweep
- Hfss 3D pcb via capped and filled with epoxy
- AEDT Natural Convection with default correlation is failing solver initializatio
- HFSS libnvidia-ml.so too old or could not be found – Warning in slurm job output
- Three-Phase Voltage Imbalances in dual stator electric generator
- STL Import Errors in HFSS After Cleaning in SpaceClaim
- Calc Error in Field Calculator after PyAEDT Analyze
- import file autocad 3d
Top Contributors
-
3872
-
1414
-
1241
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.