We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
3D Design

3D Design

Topics related to Ansys Discovery and Ansys SpaceClaim.
  1. All Channels
  2. 3D Design
  3. Not getting ignition in Ansys Forte when fuel injection mass is split into two.

Not getting ignition in Ansys Forte when fuel injection mass is split into two.

    • May 31, 2025 at 1:59 pm
      Hasan
      Subscriber

      Two solid cones were used in sector mesh diesel injection at different angles as shown in image below but worked with one solid cone with one mass flow injection. Didnt work when used two Nozzles under one soild cone. Only worked with complete mass injection under one solid cone, one nozzle and one injection. Any help form anyone, thanks in advance, as you can see in image beow spray is split into two cones at two different viertical angles. 

       

Viewing 0 reply threads
  • You must be logged in to reply to this topic.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.