not converged solution

- June 24, 2020 at 6:14 am
  
  febri456
  Subscriber
  
  Hello,
  
  i want to import a total deformation to a static structural simulation in Workbench 18.1 . But the solver engine is not converged on a solution.
- June 25, 2020 at 12:45 am
  
  peteroznewman
  Subscriber
  
  More information would be helpful, such as the geometry, the mesh, the loads, the supports, etc.
  
  In general, go to the Analysis Settings, turn on Auto Time Stepping and set the Initial Substeps to 50,