-
-
September 30, 2024 at 9:56 am
dangodaraamit08
Subscriber1.an overlap is detected between one or more contact regions and boundary condition(s) applied to your model. hence augmented lagrange formulation is used as the program controlled option for those contacts.
2.your product license has numerical problem size limits, you have exceeded these problem size limits and the solver cannot proceed.
this are the errors are showing and becouse of it i am not able to get result.
-
September 30, 2024 at 12:49 pm
Deepak
Ansys EmployeeÂ
Hi,
Student license has limitation in number of element that you can solve. I see there are some parts which may not be contributing in load transfer, whose parts can be cleaned up in spaceclaim.
Thanks
Deepak
Â
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- Speed up simulation in HFSS
- Workbench license error
- ansys fluent error when opening it “unexpected license problem”
- Unexpected error on Workbench: Root element not found.
- not able to get result
- Unable to recover corrupted project in Workbench
- Unattended (silent) installation of 2024R2 & -productfile switch
- Unexpected issues with SCCM deployment of Ansys Fluids and Structures 2024 R1
- Questions and recommendations: Septum Horn Antenna
- AQWA: Hydrodynamic response error
Top Contributors
-
1186
-
498
-
488
-
225
-
209
Top Rated Tags
© 2024 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.