We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
Kampus Merdeka

Kampus Merdeka

  1. All Channels
  2. Kampus Merdeka
  3. Need Help:Excessive Distortion to the ALE Air Element (Contact Blast Simulation)

Need Help:Excessive Distortion to the ALE Air Element (Contact Blast Simulation)

TAGGED: , , , , ,

    • March 15, 2025 at 9:25 am
      wong1439
      Subscriber

      Hi everyone, I’m facing an issue with my ALE blast simulation in LS-DYNA. As shown in the image below, the ALE elements appear excessively distorted during the charge detonation stage. I suspect this is reducing the timestep and causing convergence issues. I’d appreciate any guidance on resolving this.

    • April 25, 2025 at 4:04 am
      doomsdayofficial11
      Subscriber

      Excessive distortion in an ALE (Arbitrary Lagrangian-Eulerian) air element during a contact blast simulation usually points to mesh resolution or boundary condition issues. I have also faced this issue during usage of this app.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.