We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
Fluids

Fluids

Topics related to Fluent, CFX, Turbogrid and more.
  1. All Channels
  2. Fluids
  3. Mosaic technology and non-conformal mesh

Mosaic technology and non-conformal mesh

    • April 25, 2024 at 9:05 am
      Johanna Hjeltström
      Subscriber

      Hi! I am wondering how the Fluent handles the non-conformal mesh that is generated when using poly-hexcore meshing? Like the one in the picture?
      Is there anywhere you can read about it?

      Best reagrds, Johanna

    • April 25, 2024 at 2:40 pm
      Rob
      Forum Moderator

      You mean the connections that look like hanging nodes? I found this, https://www.ansys.com/en-gb/products/fluids/ansys-fluent/mosaic-meshing  and given it's mentioned once in the documentation I doubt there's anything else that we're sharing at present. 

Viewing 1 reply thread
  • The topic ‘Mosaic technology and non-conformal mesh’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.