TAGGED: static-structural, weld, weld-defining
-
-
February 17, 2021 at 11:37 am
bokaJ
SubscriberDear Ladies and Gentleman,
I want to know the deflection and the stress of a very big modell.
Therefore I will calculate the deflection of the whole modell and then look at the importent areas closer with submodells.
The modell is an welded construction. There are many welds like shown on the following picture and I am not sure how to modell them in ansys.
February 18, 2021 at 6:25 am1shan
Ansys Employee,nThere are several ways to represent welds in ansys via connections, 3d elements and shell elements. You may follow this which I think might be suitable for your case(2 bonded contact per fillet and one frictionless contact for the welded structure).nRegards,nIshan.nnViewing 1 reply thread- The topic ‘Modelling a weld’ is closed to new replies.
Innovation SpaceTrending discussions- The legend values are not changing.
- LPBF Simulation of dissimilar materials in ANSYS mechanical (Thermal Transient)
- Convergence error in modal analysis
- APDL, memory, solid
- How to model a bimodular material in Mechanical
- Meaning of the error
- Simulate a fan on the end of shaft
- Real Life Example of a non-symmetric eigenvalue problem
- Nonlinear load cases combinations
- How can the results of Pressures and Motions for all elements be obtained?
Top Contributors-
4127
-
1487
-
1318
-
1158
-
1021
Top Rated Tags© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
-
The Ansys Learning Forum is a public forum. You are prohibited from providing (i) information that is confidential to You, your employer, or any third party, (ii) Personal Data or individually identifiable health information, (iii) any information that is U.S. Government Classified, Controlled Unclassified Information, International Traffic in Arms Regulators (ITAR) or Export Administration Regulators (EAR) controlled or otherwise have been determined by the United States Government or by a foreign government to require protection against unauthorized disclosure for reasons of national security, or (iv) topics or information restricted by the People's Republic of China data protection and privacy laws.