-
-
May 18, 2024 at 7:13 am
-
May 20, 2024 at 3:46 pmGuilin SunAnsys Employee
建议你用直波导测试。
可能的原因:
模式不正确,请打开模式光源,选择自选模式,出现FDE窗口后运行计算,看看此模式是否物理传播模式;
网格不合适,请先用缺省的网格精度2;
尺寸:增加一下Y方向的仿真区和模式光源尺寸。
再有问题请单独发帖,因为明天起休假,此帖子将无人回复。
-
Viewing 1 reply thread
- The topic ‘mode光源光无法传播’ is closed to new replies.
Ansys Innovation Space
Trending discussions
Top Contributors
-
1572
-
602
-
599
-
591
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.