-
-
May 29, 2023 at 7:24 am
Fatur Rizki Anggun Juniar
SubscriberWhen we use free-free modal analysis and pre-stressed modal analysis, then how many modes must be extracted to produce the corresponding mode shape? In the mass capital participation factor, is there a total effective mass value that is used as a reference as the actual value of the total mass of the system. If so, how much is it worth?
-
May 29, 2023 at 8:34 am
Raihan Lutfianto
SubscriberHi Fatur, good question. We can use a ratio of effective mass to total mass value of 0.9. This ensures we extract a sufficient number of modes for our problem.
-
Viewing 1 reply thread
- The topic ‘Modal Analysis’ is closed to new replies.
Ansys Innovation Space
Trending discussions
Top Contributors
-
3492
-
1057
-
1051
-
965
-
942
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.