We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
3D Design

3D Design

Topics related to Ansys Discovery and Ansys SpaceClaim.
  1. All Channels
  2. 3D Design
  3. Mesh Quality Problem After Importing Geometry in ANSYS

Mesh Quality Problem After Importing Geometry in ANSYS

    • June 4, 2025 at 9:25 pm
      fatimazahra_hassine
      Subscriber

      Hello everyone,
      I'm currently working on a dental framework simulation in ANSYS. I imported my geometry but the mesh quality is very poor, with many distorted elements and warnings about mesh skewness.

      I tried fixing it by using a better CAD file with improved design, but I still get the same meshing issues. I also attempted to clean the geometry in SpaceClaim and adjust mesh settings, but the problem persists.

      • What file format do you recommend (.step, .x_t, .iges)?

      • Are there any geometry repair steps I should apply before meshing?

      • Should I use Virtual Topology or Simplify geometry?

      Any help would be greatly appreciated!

Viewing 0 reply threads
  • You must be logged in to reply to this topic.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.