TAGGED: #Modal_Analysis, transient-structural
-
-
November 30, 2023 at 11:11 am
Mahima
SubscriberHello all, I need to perform a mechanical shock simulation for a box that is subjected to half sine shock of peak acceleration of 500 m/sec2 and pulse duration of 11ms. I am not sure what data to provide for the acceleration vs time graph which is required as input for transient structural. I tried to give a function a=a(max) *sin (pi*t/T) but I am not getting the desired graph. Please help me with how to define the input for the sim. Thank you.
-
November 30, 2023 at 12:18 pm
Erik Kostson
Ansys EmployeeÂ
Â
Hi
See this post:
/forum/forums/topic/half-sine-shock-earth-gravity/
Â
You can also use the tabular data and define the values in excel and copy paste them into ansys.
https://www.youtube.com/watch?app=desktop&v=uUOcXAU-IKo
Â
Erik
Â
Â
-
December 1, 2023 at 6:20 am
Mahima
SubscriberThank you for the reply. I tried out the analysis by specifying the equation as shown in the figure for acceleration in transient structural and obtained the following graph for acceleration vs time. Now I need to simulate this for the following condition, can you please help me out with it.Â
3 shocks in positive direction followed by 3 shocks in negative direction of each three mutually perpendicular mounting positons of box for a total of 18 shocks. The rest of the conditions remain the same.Â
-
- The topic ‘Mechanical Shock test using half sine wave’ is closed to new replies.
-
2773
-
960
-
830
-
599
-
591
© 2025 Copyright ANSYS, Inc. All rights reserved.