Maxwell Simulation for Curved Magnet

- July 4, 2024 at 7:10 am
  
  Preetham M R
  Subscriber
  
  I am not getting desired Results in my Maxwell Analysis. I am suppose to get low magnetic effect in the middle as per the Physical test Reports, But here there is more Magnetic Flux generated in the middle. I wanted to know hwere i am going wrong. Aprt from that on the other ares it is fine.
- July 9, 2024 at 8:35 pm
  
  HDLI
  Ansys Employee
  
  Hello Preetham M R,
  Please plot B vector in the simulation and there different directions between middle and other points. Please check if the B measurement only supports a single direction. If Yes, you may need to find the correct direction in the test.
  HDLI