Learning Forum

[Kai Lu]

Hello, I am currently studying an amorphous alloy material used in high-speed permanent magnet synchronous motor.  The temperature and stress results of the motor have been calculated in ansys workbench.  I need to modify the material core loss model according to maxwell's material properties and add the influence of different temperatures and stresses on the loss model and BH curve. 

I already know how to add thermal modifier, but maxwell doesn't seem to have a setting for stress modifier on materials. May I ask where the influence of stress on material properties is set?  If not, can it be achieved by other means?

[Kai Lu]

Is there anyone who can help me solve that？

[DELI]

There is no stress modifer in Maxwell, you would need couple Maxwell with Ansys Structural via Workbench. Refer "Maxwell to Ansys Stress Feedback Coupling" in Maxwell manuel for more details.

[Kai Lu]

I have already couple Maxwell with Ansys Structural via Workbench and calculated the stress distribution of my model.Then I need to feedback the stress results to maxwell and ues them with stress correction formula to calculate a corrected core loss.This is a two-way coupling.I have already konw there is no stress modifer in Maxwell.I wonder if this function(stress modify) can be implemented indirectly.