MAPDL Solver taking too long to solve!

- October 6, 2019 at 2:31 pm
  
  kishenharidas
  Subscriber
  
  Hi,
  
  I have recently started to face an issue while solving 3D models with APDL. The solver s taking way too long to solve. Did not have this problem a few days ago. I am not sure what has changed. I tried running the applications on both Shared-Memory Parallel and Distributed computing and its the same issue. I am using ANSYS 2019 R2 with a Research licence connected to the Computer at the university. I connect to this system using my home computer through remote desktop. To verify the problem, I just ran a simple example 3D program from the APDL guide where the Analysis type was Transient with a time size of 1s and a time step of 0.1s. the simulation runs way too slow. Could someone please guide me here? Have attached the image of the Warning message from the console of APDL.
  
  Thank you
- October 21, 2019 at 4:10 am
  
  sathya
  Subscriber
  
  Hi,
  
  Is there any difference in the element count of previous runs?
- October 21, 2019 at 4:14 am
  
  sathya
  Subscriber
  
  In addition to count check, play with memory settings too.