Learning Forum

[abankusomari]

Please i am PhD student of jiangsu university in the school of mechanical engineering.My research area is magnetic gears and i will need tutorial videos and pdf documents in the modeling and analysis of magnetic gears.i would be very grateful if i get them to help me in my studies.

Thank you

[Erik Kostson]

Hi

Can you explain much more in details what you want to model and simulate and what the end goal is of your analysis.

The more detail provided the more relevant feedback users of this forum are likely to provide.

All the best

Erik

[abankusomari]

please Sir thanks for your swift response.please i want to model a coaxial magnetic gear with embedded permanent magnet and to do a static and dynamic  torque analysis for both inner and outer rotor .I also want to view the magnetic flux distribution for the magnet gear and air gap. Thank you 

[Erik Kostson]

Hi

That is good, but could you attach some images of this device, so users can see how it looks like. ALso describe if you provide the torque (say a moment), or if it is like an electric current so like an e-motor that rotates the parts. So again much more info is needed in order for users of this forum to give some feedback.

Erik

[abankusomari]

[abankusomari]

It is an electromagnetic device 

[Erik Kostson]

Hi

You could perhaps use Ansys Maxwell for this.

A tutorial:

https://www.youtube.com/watch?v=WBX50JkH5Wc

All the best.

[abankusomari]

Thanks for your feed back.Please how  can i plot the radial and tangential flux density for both inner and outer air gap for a magnetic gear.And also how can i plot the harmonics distribution at both the inner and outer air gap .Thank you 

[abankusomari]

[Erik Kostson]

Hi

As this is a mechanical forum,

Post your questions here:

/forum/forums/forum/discuss-simulation/electronics-2/

All the best

Erik