-
-
May 23, 2024 at 8:25 pmFady ElshazlyBbp_participant
Hello,Â
Â
I am trying to show beam strains and stresses in LS-DYNA but it does not show any values. However, it shows forces for these elements.
or what are the steps i should follow to record and read stress and strain for beam?
Thanks
-
May 24, 2024 at 3:07 pmUshnish BasuAnsys Employee
Use an integrated beam formulation, e.g. the type 1 beam, and set BEAMIP and STRFLG in DATABASE_EXTENT_BINARY
-
May 31, 2024 at 1:50 amUshnish BasuAnsys Employee
Actually, to get axial strains, set BEAMIP to the number of integration points for the section. Then, after running the model, read d3plot into LS-PrePost and click  History > Int.Pt. > Etype: Beams > (click on any beam element) > Axial Strain > Plot.
-
Viewing 2 reply threads
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- RSS is disabled.
- ANSYS Mechanical won’t open and stays on Blank Gray Screen (Path environment va)
- ansys fluent error when opening it “unexpected license problem”
- Elastic Licensing DNS gateway changes
- Ansys 2024 R1 – The installation completed with warnings/errors.
- Poor quality mesh at trailing edge for 3d wing
- Not find helic___[]_.tgz file
- LS-Dyna Beam elements outputs
- Fluent
Top Contributors
-
421
-
192
-
178
-
162
-
140
Top Rated Tags
© 2024 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.