We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
Fluids

Fluids

Topics related to Fluent, CFX, Turbogrid and more.
  1. All Channels
  2. Fluids
  3. LOX combustion

LOX combustion

    • July 20, 2024 at 8:04 am
      Zwernjayden
      Subscriber

      Do I need to model using VOF? I'm having trouble with the combustion, and it's unclear to me if the liquid-> gas transition in the injector is important if I only care about wall temp, and the combustion model is giving me issues when I just set the mass flow rate of Lox. 

    • July 22, 2024 at 2:17 pm
      Rob
      Forum Moderator

      It depends. VOF will be computationally very expensive, so we'd typically use DPM droplets in Fluent. 

Viewing 1 reply thread
  • The topic ‘LOX combustion’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.