We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Innovation Space

FREE STUDENT SOFTWARE

li-ion battery electrochemistry

- May 21, 2025 at 4:57 am
  
  yujun0219
  Subscriber
  
  Through Potential/Electrochemistry models, we would like to return the simulation on SEI generation and lithium plating inside the cylindrical battery cell.
  The battery was modeled as shown in the picture below, and the electrolyte part is liquid and the electrode part is solid, so the values are put as desired in the mode, and the current density is put in the cathode part, so the simulation is turned on, but it does not work as an error occurs. I wonder what the problem is.
  I couldn't upload the photo, so I posted the same question on my feed

Viewing 0 reply threads

You must be logged in to reply to this topic.

Ansys Assistant

Hey there, you are quite inquisitive!
You have hit your hourly question limit.
Please retry after '10' minutes.
For questions, please reach out to ansyslearn@ansys.com.

RETRY

Are you sure you want to leave? The window will be closed.

OK