We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Innovation Space

FREE STUDENT SOFTWARE

Is it possible to simulate a free jet (Water) in the air using Ansys Discovery?

- August 25, 2021 at 5:48 pm
  
  schwehr
  Subscriber
  
  Dear Ladies and Gentlemen, For the processing of a study project, a flow simulation of water jet nozzles is to be carried out using ANSYS Discovery. I have already simulated the water flow through the nozzle as shown in the image. The simulation stops as soon as the water flow would leave the nozzle. Is it possible to simulate the following free jet of the water stream in the air? Thanks for the help.
- August 26, 2021 at 6:12 am
  
  Subashni Ravichandran
  Forum Moderator
  
  Hello Alexander Schwehr
  
  This is currently not possible in Discovery as in this case two fluid mediums come into play.
  
  This can be simulated in other Ansys Workbench, Fluent.
  - August 26, 2021 at 9:30 am
    
    schwehr
    Subscriber
    
    Hello Subashni
    
    Thank you for the information and the fast response.

Viewing 1 reply thread

The topic ‘Is it possible to simulate a free jet (Water) in the air using Ansys Discovery?’ is closed to new replies.