General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Is it possible to ignore the results on one body to focus on another?

Is it possible to ignore the results on one body to focus on another?

TAGGED: , ,

    • April 3, 2024 at 5:58 pm
      Dylan Pinkston
      Subscriber

      I am simulating a blade shearing a pipe and the highest stress is on the pipe which is to be expected by I need the data on the blade. Is it possible to figure out the max stresses on the blade?

    • April 3, 2024 at 7:27 pm
      Dylan Pinkston
      Subscriber

      This is the stress results where I want to examime the stress on the blade but it only shows me the results for the pipe.

    • April 3, 2024 at 8:23 pm
      peteroznewman
      Subscriber

      When you create a Stress result, the default is All Bodies, but you are free at the time of creation to select one body and click Apply.

    • April 4, 2024 at 4:48 pm
      Dylan Pinkston
      Subscriber

      I tried that and adjusting the legend to adjust to visible but the blade stayed blue, is the simulation saying the blade does not have stresses?

    • April 4, 2024 at 8:36 pm
      peteroznewman
      Subscriber

      Please show a screen snapshot of the stress on just the blade. Does it show a value of zero?  Which analysis program are you using?

Viewing 4 reply threads
  • The topic ‘Is it possible to ignore the results on one body to focus on another?’ is closed to new replies.
Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.