We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
Materials

Materials

Topics related to Granta Design and more.
  1. All Channels
  2. Materials
  3. Introducing a hole within particles in an open-ended cylindrical geometry

Introducing a hole within particles in an open-ended cylindrical geometry

    • May 19, 2025 at 4:50 pm
      cnmatu
      Subscriber

      I would like to replicate the attached geometry. It is a cylinder (38mm diameter) that is hollow at both ends with soil particles within it having a 3mm diameter hole drilled through the centre of the soil particles. How do I replicate this in Workbench DesignModeler and be able to run it in Rocky so that during the simulation, cohesionless particles collapse into the hole?Soil in cylindrical geometry (Open at both ends) - Soil fills cylinder entirely

    • May 20, 2025 at 9:51 am
      Rob
      Forum Moderator

      https://innovationspace.ansys.com/forum/forums/topic/introducing-a-hole-within-particles-in-an-open-ended-cylindrical-geometry-2/

Viewing 1 reply thread
  • The topic ‘Introducing a hole within particles in an open-ended cylindrical geometry’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.