Learning Forum

[Conorg123]

HI, I keep getting errors when trying to redownload Ansys. I had the 2019 version on my SSD and i deleted it off my laptop. I re-downloaded the 2021 R2 onto my external hard drive and i am getting these errors. Any help is greatly appreciated

Date verification complete...No conflicts found.

The installation will copy the prerequisite setup files from the media in case you need to reconfigure later or if you need to configure client machines for products installed to a network share.

This may take a while ...

Successfully copied prerequisites from media.

You don't need to install any prerequisites.

Reading the installation media contents - please wait.

Extraction: D:Ansysinstcore clCOMMON.TGZ ...

Extraction: D:Ansysinstcore clWINX64.TGZ ...

Extraction: D:AnsysstudentWINX64.7z ...

Extraction: D:AnsyslicenseWINX64.7z ...

RSS is disabled

Performing licensing configuration via the following command...

"D:AnsysANSYS IncANSYS StudentShared Filesinwinx64 clsh.exe" "D:AnsysANSYS IncANSYS StudentShared FilesLicensinglicadminscriptsLicAdminMain.itcl" -silentinstallclient -release "2021 R2" -lang en-us

Licensing configuration has completed.

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigCommon.exe

Configuring ANSYS TurboGrid ...

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigTG.exe

Creating Start Menu items for Ansys client licensing ...

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigWB.exe

Running "D:AnsysANSYS IncANSYS Studentv212RSMinAnsConfigRSM.exe" -encodingUTF8

couldn't execute "D:AnsysANSYS IncANSYS Studentv212RSMinAnsConfigRSM.exe": no such file or directory

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigANSYS.exe

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigAQWA.exe

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigCFX.exe

Configuring ANSYS Viewer ...

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigSpaceClaim.exe

Configuring ACP ...

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigACP.exe

Configuring Help ...

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigHelp.exe

couldn't execute "D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigHelp.exe": no such file or directory

ANSYS Internet Doc has been configured.

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigCHEMKIN.exe

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigFORTE.exe

Configuring EnSight ...

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigEnsight.exe

Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigFENSAP.exe

Successfully created file associations.

The installation completed with warnings/errors. Review any .err or .log files in:

D:AnsysANSYS IncANSYS Student

[ANSYS_MMadore]

Please run the uninstall for v212, C:\Program Files\ANSYS Inc\ANSYS Student\v212\Uninstall.exe
Next, delete C:\Program Files\ANSYS Inc\ANSYS Student\v212\, also delete %APPDATA%\Ansys\v212
Try to download another copy of the installer, extract the .zip file and then run the setup.exe making sure to right-click -> Run as administrator.