InSb in Lumerical CHARGE solver

- August 13, 2023 at 8:45 pm
  
  ehsanul.karim
  Subscriber
  
  I have been trying to simulate a solar cell based on InSb absorber layer in Lumerical CHARGE. But the results do not converge even after trying different combinations of dopings. Is there any example available of similar simulation set up, that I may refer to?
  Thanks
- August 14, 2023 at 9:35 pm
  
  Guilin Sun
  Ansys Employee
  
  yes, please refer to this exmaple https://optics.ansys.com/hc/en-us/articles/360042165534-Planar-silicon-solar-cell
  As for the diverging issue, please visit this article https://optics.ansys.com/hc/en-us/articles/8355464963987-Troubleshooting-convergence-errors-in-CHARGE
  Just a reminder that the correct Ansys Community for Lumerical products is in the Photonics forum: /forum/forums/forum/discuss-simulation/photonics/