Fluids

Fluids

Topics related to Fluent, CFX, Turbogrid and more.
  1. All Channels
  2. Fluids
  3. Initialization Problem when using sliding mesh with EWF model

Initialization Problem when using sliding mesh with EWF model

TAGGED: , ,

    • October 14, 2025 at 7:22 am
      1917443115
      Subscriber

      I am simulating a moving jet impact a wall to form a film with sliding mesh and EWF model in ANSYS Fluent 2024R1. When I set a mesh interfaces, EWF cant initialize.

    • October 14, 2025 at 8:31 am
      Rob
      Forum Moderator

      Does the film interact with the interface? 

      • October 14, 2025 at 8:36 am
        1917443115
        Subscriber

        no, I have a jet through the interface

    • October 14, 2025 at 9:09 am
      abhishek.roy
      Ansys Employee

      Hi, Eulerian wall Film is incompatible with NCI. Since 2024R2 this has been added as beta feature. You can enable it by following TUI command  

      /define/beta-feature-access yes ok

      /define/models/eulerian-wallfilm/enable-film-nci-support? yes

      • October 14, 2025 at 11:44 am
        1917443115
        Subscriber

        Thank you for your help,it works!

Viewing 2 reply threads
  • You must be logged in to reply to this topic.
Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.