We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
Electronics

Electronics

Topics related to HFSS, Maxwell, SIwave, Icepak, Electronics Enterprise and more.
  1. All Channels
  2. Electronics
  3. Induction heating ；Maxwell and Workbench coupling

Induction heating ；Maxwell and Workbench coupling

    • May 11, 2025 at 5:24 am
      2194961438
      Subscriber

      I want to use the coupling of Maxwell and Workbench to solve the induction problem. In the case, the excitation is sinusoidal excitation, and the permeability of the heated workpiece changes with temperature. And during post - processing, I want to see the temperature varying with time. Should I use the Maxwell eddy solver or the Maxwell transient solver to couple with the transient thermal module in Workbench?

    • May 12, 2025 at 6:31 am
      2194961438
      Subscriber

      At the same time, I would like to ask which modules in Workbench can calculate eddy currents and Ohmic losses for coupling with the transient thermal module

Viewing 1 reply thread
  • You must be logged in to reply to this topic.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.