We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Innovation Space

FREE STUDENT SOFTWARE

Incorrect Dimensions drawingsheet

- October 3, 2024 at 8:42 am
  
  paul pladet
  Subscriber
  
  Hello,
  A customer tried to dimension a part in the drawingsheet, but somehow it displays the incorrect dimension.
  
  The correct dimension should be 20mm, but somehow in a different view its 27mm. You can also see that 27mm should be the edge of the circle.
  
  Any ideas why this could happen?
- October 3, 2024 at 1:15 pm
  
  Devendra Badgujar
  Forum Moderator
  
  Hello Paul,
  Are the dimensions on different plane? Can you try changing this option to TRUE:
  Let me know if this helps.
  Regards,
  Devendra
- October 17, 2024 at 1:23 pm
  
  benjamin
  Subscriber
  
  Hi Devendra,
  
  This didnt help, any other suggestions?
- October 17, 2024 at 1:30 pm
  
  Devendra Badgujar
  Forum Moderator
  
  That's strange, which version you are using?
- October 17, 2024 at 1:30 pm
  
  benjamin
  Subscriber
  
  2024R2
- October 21, 2024 at 8:43 am
  
  benjamin
  Subscriber
  
  Any other solution Devendra?
- October 21, 2024 at 9:00 am
  
  Devendra Badgujar
  Forum Moderator
  
  Hi Benjamin,
  Is the hole round or has some different section? It seems it has some protrusions at ends something. Can you please share the enlarged image of your geomtry?
  Regards,
  Devendra

Viewing 6 reply threads

You must be logged in to reply to this topic.