TAGGED: impedance-matrix, induction-motor-maxwell2d, rotor
-
-
October 8, 2024 at 9:59 am
dharanimoka
SubscriberIn the Impedance matrix of induction machine, are the resistance and reactance value that are shown in the table include the rotor resistance and inductance? and if so are these referred to the stator and the values shown are the sum of both the stator resistance and rotor resistance?
I have attached the picture of an example
impedance matrix.Â
-
November 19, 2024 at 8:22 am
Timos
Ansys EmployeeHello, these values are referred to the stator side that the windings are assgined
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- Y wiring method and the start and end points of winding.
- Lumped Port Deembed
- Hfss 3D pcb via capped and filled with epoxy
- Optimizing Via Impedance in Ansys HFSS 3D Layout Using Geometric Parameter Sweep
- AEDT Natural Convection with default correlation is failing solver initializatio
- HFSS libnvidia-ml.so too old or could not be found – Warning in slurm job output
- Three-Phase Voltage Imbalances in dual stator electric generator
- STL Import Errors in HFSS After Cleaning in SpaceClaim
- Calc Error in Field Calculator after PyAEDT Analyze
- import file autocad 3d
Top Contributors
-
3862
-
1414
-
1231
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.