-
-
September 27, 2023 at 9:48 am
Noura Mansour
Subscriberi want to get graph between force and displacement of nonlinear spring
boundry condition fixed support and force -
September 27, 2023 at 10:20 am
Erik Kostson
Ansys EmployeeHi Noura
That is great to hear (that you use WB).
Do you have something though that you would like to get some feedback?
Please add/post here any questions you might have.
All the best
Erik
-
September 27, 2023 at 10:26 am
Noura Mansour
Subscriberi want to get graph between force and displacement of nonlinear spring
boundry condition fixed support and force
-
-
September 27, 2023 at 10:35 am
Erik Kostson
Ansys EmployeeHi
This video shows and should help with that (charts on nonlinear spring results)
https://www.youtube.com/watch?v=NN3Xf56jc0c
Erik
-
September 27, 2023 at 10:42 am
Noura Mansour
Subscriberthe nonlinear spring is hourglass shape and i want to use boundary condition force not displacement
so if i use force what i use at solution section to get the graph
-
-
- The topic ‘i’m using ansys workbench’ is closed to new replies.
- The legend values are not changing.
- LPBF Simulation of dissimilar materials in ANSYS mechanical (Thermal Transient)
- Convergence error in modal analysis
- APDL, memory, solid
- How to model a bimodular material in Mechanical
- Meaning of the error
- Simulate a fan on the end of shaft
- Nonlinear load cases combinations
- Real Life Example of a non-symmetric eigenvalue problem
- How can the results of Pressures and Motions for all elements be obtained?
-
3862
-
1414
-
1231
-
1118
-
1015
© 2025 Copyright ANSYS, Inc. All rights reserved.