TAGGED: safety-factor, von-mises-stress
-
-
February 4, 2021 at 8:02 am
Faryal
SubscriberFebruary 4, 2021 at 11:31 ampeteroznewman
SubscribernIt depends on the material properties.nDuctile materials are evaluated against Equivalent Stress.nBrittle materials are evaluated against Maximum Principal Stress.nThere is a material property called Elongation, sometimes called Elongation at Break. nElongation is the value of Total Strain when the material fractures.nDuctile materials have Elongation greater than 0.05 or 5%nBrittle materials have Elongation less than 0.05 or 5%.nFebruary 4, 2021 at 11:36 amFaryal
SubscriberMy material is aluminum and it is ductile but there is maximum stress, minimum stress, average stress. Which one among the results i should consider?.Viewing 2 reply threads- The topic ‘I am unable to grasp the Stress and safety Factor?’ is closed to new replies.
Ansys Innovation SpaceTrending discussionsTop Contributors-
3427
-
1057
-
1051
-
896
-
887
Top Rated Tags© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
-
The Ansys Learning Forum is a public forum. You are prohibited from providing (i) information that is confidential to You, your employer, or any third party, (ii) Personal Data or individually identifiable health information, (iii) any information that is U.S. Government Classified, Controlled Unclassified Information, International Traffic in Arms Regulators (ITAR) or Export Administration Regulators (EAR) controlled or otherwise have been determined by the United States Government or by a foreign government to require protection against unauthorized disclosure for reasons of national security, or (iv) topics or information restricted by the People's Republic of China data protection and privacy laws.