-
-
January 25, 2024 at 3:16 am
ly meng
Subscriber -
January 25, 2024 at 7:24 am
Sampat Kumar
Ansys EmployeeHi, ly meng,
Your question is not visible to us. Could you please try uploading it again? I think there might have been a problem with the upload.
Best Regards,
Sampat-
January 26, 2024 at 2:50 am
ly meng
Subscriberin the modal result, deformation, all flexible bodies show up.
but theres only a point to represent the rigid body .
How to show the whole rigid body
-
-
January 25, 2024 at 7:32 am
Sampat Kumar
Ansys EmployeeAccording to your title "How to show rigid body in mode shape?"
I've recommended a video course that I think could be useful for you. Please take a look and let me know if it isn't helpful or if your question is different.
/courses/index.php/courses/modal-analysis-in-ansys-mechanical/lessons/how-to-evaluate-rigid-body-modes-in-a-modal-analysis-lesson-4/
Best Regards,
Sampat -
January 26, 2024 at 3:49 am
-
Viewing 3 reply threads
- The topic ‘how to show rigid body in mode shape?’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- The legend values are not changing.
- LPBF Simulation of dissimilar materials in ANSYS mechanical (Thermal Transient)
- Convergence error in modal analysis
- APDL, memory, solid
- How to model a bimodular material in Mechanical
- Meaning of the error
- Simulate a fan on the end of shaft
- Nonlinear load cases combinations
- Real Life Example of a non-symmetric eigenvalue problem
- How can the results of Pressures and Motions for all elements be obtained?
Top Contributors
-
3862
-
1414
-
1221
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.