We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
3D Design

3D Design

Topics related to Ansys Discovery and Ansys SpaceClaim.
  1. All Channels
  2. 3D Design
  3. How to rotate a section plane on ANSYS Discovery 2021R1

How to rotate a section plane on ANSYS Discovery 2021R1

TAGGED: 
    • March 17, 2021 at 6:14 am
      TNoguchi
      Subscriber

      Let'me know how to rotate a section plane on new GUI of ANSYS Discovery.
      I want to see the section plane mapping from results.
      I can see the arc arrows to rotate a section plane on previous GUI.
      I can't display the arrows on new GUI.

    • March 17, 2021 at 7:42 am
      Naresh Patre
      Ansys Employee

      Hello TNoguchi

      If you enable the Cut Plane option from Results Arc, then select the cut plane, the Move handle with arrows appear for orienting the plane as required. See below snapshot. Is this what you are looking for?

       

Viewing 1 reply thread
  • The topic ‘How to rotate a section plane on ANSYS Discovery 2021R1’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.