How to find the magnetic force acting between 3 permanent magnets

- August 12, 2021 at 2:16 pm
  
  AkhilSuresh
  Subscriber
- August 15, 2021 at 1:14 pm
  
  NKC
  Forum Moderator
  
  Hi @AkhilSuresh The screenshot is not clear enough to understand your setup.
  If your interest is to find the force experienced by each of the magnets. You need to set the force parameter for these magnets.
  Select the magnet>Right mouse click>assign>force.
  Then you can plot the force.
  Refer to Maxwell help on this topic for more details.
  Regards Navya