Learning Forum

[aakashmani.rs.mec23]

I am doing battery modeling in ansys Fluent and i need to cool down using Thermoelectric cooler (Peltier Effect) using Thermal-Electric module, so i need to couple Fluent and Thermal- Electric module in workbench. Please guide me on this.

[RS]

hi, attaching an example coupling maxwell-fluent. This does exactly opposite to what you are asking (i.e it is for heating ).

Check by any means you can customise it for your needs. 

Bar-and-Coil Induction Heating Co-Simulation (Maxwell-Fluent)

This unsteady/transient electromagnetic-thermal tutorial is based on a simple bar-and-coil induction heating co-simulation with two-way 3D data transfers. Maxwell performs an electromagnetic Eddy-Current analysis which is dependent on System Coupling time and Fluent performs a transient thermal analysis, while System Coupling coordinates the simultaneous execution of their solvers and the data transfers between their coupled volume regions.

[aakashmani.rs.mec23]

Hello, I'm unable to access the link provided above. Could you please share the information in an alternative format or a more accessible way?