We’re updating our badges platform. Badge issuance is temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. how to choose a fiber orientation for shell element

how to choose a fiber orientation for shell element

    • December 20, 2019 at 8:14 pm
      sabrina2019
      Subscriber

      Hi every one 


      I am working on the behavior of FRP confined concrete under axial loading using ANSYS APDL 


      i have chosen the shell element to model FRP unidirectionel sheet and i have to orient the fiber in lateral direction of the concrete to create the confinement 


      so i do this following step 


      preprocessor - section - shell - add/edit - 


      my question is about the angle to specify for fiber orientation (0 or 90 degree) 


      could any one help me 


      i will be very grateful 


      thank you 

Viewing 0 reply threads
  • The topic ‘how to choose a fiber orientation for shell element’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.