TAGGED: -Ansys-Maxwell-electronics, eddy-current, litz-wire
-
-
August 29, 2024 at 7:38 am
poonamchnd23
SubscriberCan anyone tell me how the current is defined in the Litz wire for Coil terminal excitation with winding structure??
Â
The defined stranded current is the single strand current or total current to the conductor??
-
August 29, 2024 at 8:08 pm
MirandaH
Ansys Employeehello, the current in a Litz wire for coil terminal excitation with a winding structure is defined according to the stranded source conductor bodies, which are applicable to any magnetic field problem where the source of excitation comes from a coil. It's the total current through the cross section.
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- Y wiring method and the start and end points of winding.
- Lumped Port Deembed
- Optimizing Via Impedance in Ansys HFSS 3D Layout Using Geometric Parameter Sweep
- Hfss 3D pcb via capped and filled with epoxy
- AEDT Natural Convection with default correlation is failing solver initializatio
- HFSS libnvidia-ml.so too old or could not be found – Warning in slurm job output
- Three-Phase Voltage Imbalances in dual stator electric generator
- STL Import Errors in HFSS After Cleaning in SpaceClaim
- Calc Error in Field Calculator after PyAEDT Analyze
- import file autocad 3d
Top Contributors
-
3882
-
1414
-
1241
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.