- 
		
			- 
October 8, 2021 at 9:53 amMichael93 SubscriberOctober 13, 2021 at 2:34 pmDELI Ansys Employeeyou need set the wire diameter and number of strand in material property.
  
 For more detailed information, please refer Maxwell Online Help: https://ansysproducthelpqa.win.ansys.com/Views/Secured/Electronics/v212/en/home.htm#../Subsystems/Maxwell/Content/LitzWireModeling.htm?TocPath=Maxwell%257CMaxwell%2520Help%257CAssigning%2520Materials%257CAdding%2520New%2520Materials%257C_____9
 
 October 25, 2021 at 1:47 pmMichael93 SubscriberThat worked, thank you! I still not now how to calculate the extra losses. The result shows the same as without litz wires
 Viewing 2 reply threads- The topic ‘HF Litze in Ansys 2021 simulieren’ is closed to new replies.
 Innovation SpaceTrending discussions- Lumped Port Deembed
- HFSS libnvidia-ml.so too old or could not be found – Warning in slurm job output
- Optimizing Via Impedance in Ansys HFSS 3D Layout Using Geometric Parameter Sweep
- Hfss 3D pcb via capped and filled with epoxy
- AEDT Natural Convection with default correlation is failing solver initializatio
- STL Import Errors in HFSS After Cleaning in SpaceClaim
- Three-Phase Voltage Imbalances in dual stator electric generator
- Calc Error in Field Calculator after PyAEDT Analyze
- import file autocad 3d
- Co-simulation in Q3D, Icepak – meshing problem
 Top Contributors- 
                        
                        4167
- 
                        
                        1487
- 
                        
                        1363
- 
                        
                        1189
- 
                        
                        1021
 Top Rated Tags© 2025 Copyright ANSYS, Inc. All rights reserved. Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
 
- 
			The Ansys Learning Forum is a public forum. You are prohibited from providing (i) information that is confidential to You, your employer, or any third party, (ii) Personal Data or individually identifiable health information, (iii) any information that is U.S. Government Classified, Controlled Unclassified Information, International Traffic in Arms Regulators (ITAR) or Export Administration Regulators (EAR) controlled or otherwise have been determined by the United States Government or by a foreign government to require protection against unauthorized disclosure for reasons of national security, or (iv) topics or information restricted by the People's Republic of China data protection and privacy laws.
            
            
 You are navigating away from the AIS Discovery experience
You are navigating away from the AIS Discovery experience 
               
          