We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Help with Fatigue

Help with Fatigue

    • April 27, 2020 at 2:44 am
      Aymanbali
      Subscriber

      Hello everyone,


      im working on a problem , i should do a fatigue simulation on a  test specimen , the geometry is very easy and i have no problem with the doing the fatigue itself.


      My problem is , they are asking me to the fatigue simulation in different orientations : Vertikal and Horizontal


      does anyone have any idea how can i do that? im new to this ansys world , i would be really greatful for any help!


      Stay safe

    • April 27, 2020 at 3:52 am
      peteroznewman
      Subscriber

      You are describing a physical test that should be done on many samples tested in a tensile testing machine. The test samples are to be made in an AM machine with different build directions. This is not something for simulation.

Viewing 1 reply thread
  • The topic ‘Help with Fatigue’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.