-
-
March 19, 2024 at 1:34 pmYaru ChenSubscriber
我在利用FDTD软件中的Polarization ellipse分析组,而且我使用的光源为BFAST斜入射,请问这种情况我是不是不适合使用宽光谱更适合用单波长光源仿真(我这样做是对的吗)?
在使用单波长时是不是不关心材料拟合的问题,不需要特意对材料进行拟合?
-
March 19, 2024 at 7:47 pmGuilin SunAnsys Employee
BFAST斜入射适合使用宽光谱; Bloch 边界适合单波长光源仿真。
单波长仿真可以不要拟合,因为你只需要这个单波长的数值。
-
March 20, 2024 at 12:34 amYaru ChenSubscriber
在使用了BFAST光源以后,边界条件是被锁定要使用Bloch边界条件的。我现在即使用的BFAST光源又用的Bloch边界+单波长,这样使用是否存在冲突呢?出的结果还可信吗?
-
March 20, 2024 at 12:48 am
-
March 24, 2024 at 1:42 amYaru ChenSubscriber
请问使用Polarization ellipse分析组在单波长计算出来的振幅和相位与波长扫描时对应波长下求得的结果不一致是为什么?
-
March 25, 2024 at 4:54 pm
-
Viewing 5 reply threads
- The topic ‘关于材料拟合的问题’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- Difference between answers in version 2024 and 2017 lumerical mode solution
- Errors Running Ring Modulator Example on Cluster
- INTERCONNECT – No results unless rerun simulation until it gives any
- Import material .txt file with script
- Trapezoidal ring
- Help for qINTERCONNECT
- Issues with getting result from interconnent analysis script
- Absorption cross-section of AuNR excited by prism-based TIR
- How to measure transmission coefficients on a given plane .
- Topology Optimization Error
Top Contributors
-
1406
-
599
-
591
-
555
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.