TAGGED: -Ansys-Maxwell-electronics, 2D, launcher
-
-
January 4, 2024 at 7:21 pm
ctunceroglu
SubscriberHello, I'm trying to simulate the induction launcher given in the link below. I've managed to obtain all the values except for the velocity change. My main issue is that I'm trying to conduct a temperature analysis, but when I select the field overlay, the heat colors do not appear. It appears gray as shown in the picture. I hope you can help.
https://www.programmersought.com/article/81474266082/
 -
April 2, 2024 at 6:51 am
NKC
Forum ModeratorUnfortunately, this question is beyond the scope for ANSYS employees to answer on a public forum, so hopefully other users can chime in.
-
Viewing 1 reply thread
- The topic ‘grey temperature colour in maxwell 2d’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- Y wiring method and the start and end points of winding.
- Lumped Port Deembed
- Optimizing Via Impedance in Ansys HFSS 3D Layout Using Geometric Parameter Sweep
- Hfss 3D pcb via capped and filled with epoxy
- AEDT Natural Convection with default correlation is failing solver initializatio
- HFSS libnvidia-ml.so too old or could not be found – Warning in slurm job output
- Three-Phase Voltage Imbalances in dual stator electric generator
- STL Import Errors in HFSS After Cleaning in SpaceClaim
- Calc Error in Field Calculator after PyAEDT Analyze
- import file autocad 3d
Top Contributors
-
3872
-
1414
-
1241
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.