3D Design

3D Design

Topics related to Ansys Discovery and Ansys SpaceClaim.
  1. All Channels
  2. 3D Design
  3. Geometry size reduction on fluent (Domain size)

Geometry size reduction on fluent (Domain size)

    • June 17, 2020 at 12:18 pm
      aar007
      Subscriber

      Hi, I am working with an imported committee grid (mesh) and I want to reduce the size of the domain ?? I am wondering if it is possible to edit geometry in fluent as I don't have access to the actual sketch. 


       


      Thanks

    • June 17, 2020 at 1:42 pm
      Rob
      Forum Moderator

      You can split/separate the mesh and delete zones. Fluent doesn't have the geometry, all it sees is the mesh so it's not as precise as working in the geometry tools. 

    • June 17, 2020 at 1:59 pm
      aar007
      Subscriber

      ok, will give that a try


       


      thanks


       

Viewing 2 reply threads
  • The topic ‘Geometry size reduction on fluent (Domain size)’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.