General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. format of the units

format of the units

    • November 6, 2017 at 12:02 pm
      momidor
      Subscriber

      Hello. Currently I have format of the units .00. I would like to decrease to . only, i.e. instead of 100.00 I woudl to have 100 only. In the attached screen shot is the structural Huber-Misses-Hencky stress.   

    • November 6, 2017 at 1:22 pm
      peteroznewman
      Subscriber

      Right click on the legend and pick Digits and pick 2. 



      Cheers,


      Peter

    • November 6, 2017 at 5:30 pm
      momidor
      Subscriber

      Thanks Peter. Legend are ok but probe  still not 

    • November 7, 2017 at 4:38 am
      peteroznewman
      Subscriber

      In Workbench, Tools, Options, Appearance, scroll down to Number of Significant Digits and change from 5 to 3.


        


      Cheers.

Viewing 3 reply threads
  • The topic ‘format of the units’ is closed to new replies.
Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.