-
-
October 4, 2017 at 12:20 pm
vganore
Ansys EmployeeNo. The forces are calculated based on static equilibrium at the center of gravity of the contact nodes, not at the pilot node. The forces are larger at the nodes that are away from the center of gravity, even if they are closer to point-mass.
-
October 4, 2017 at 2:39 pm
pgl
Ansys EmployeeNo. The forces are calculated based on static equilibrium at the center of gravity of the contact nodes, not at the pilot node. The forces are larger at the nodes that are away from the center of gravity, even if they are closer to point-mass.
-
Viewing 1 reply thread
- The topic ‘Force applied by a pilot node’ is closed to new replies.
Ansys Innovation Space
Trending discussions
Top Contributors
-
3477
-
1057
-
1051
-
945
-
912
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.