Fluent meshing using tree, not workflow

- October 31, 2021 at 12:22 pm
  
  nviz
  Subscriber
  
  Could anyone recommend a tutorial for fluent meshing using tree and not workflow. Thank you
- November 1, 2021 at 12:45 pm
  
  Karthik Remella
  Administrator
  
  Hello There are several old videos on YouTube on how to mesh using the Fluent Meshing tree structure. These videos may help you get started. Here is one such video from our Channel Partner, Leap Australia.
  How to create a Polyhedral Mesh using ANSYS Fluent Meshing - YouTube
  Just curious - any reason why you wish to mesh outside the Watertight Workflow?
  Karthik
- November 1, 2021 at 4:16 pm
  
  nviz
  Subscriber
  
  Thank you, appreciate it. Yes, we have 19.2 at work but when opened from workbench it only has tree structure and no workflow tab.
- November 1, 2021 at 5:11 pm
  
  Rob
  Forum Moderator
  
  The workflow didn't go live in Workbench until a release or so after the stand alone version.
- November 2, 2021 at 5:57 pm
  
  nviz
  Subscriber
  
  Thanks Rob
  That was very simple and but very helpful. Using workflow now.