-
-
January 5, 2024 at 8:30 am
Y JM
Subscriber我在使用 maxwell 模拟时遇到以下问题: 查找传导路径:发现多块体未连接,请将它们分开。可能的错误正文为“Polyline18”。
Polyline18 is my induction coil and is not connected to other structures, how can I solve this problem?
-
January 11, 2024 at 5:14 pm
Reshmi Raghavan
Ansys EmployeeHello YJM,
Could you please share the snapshot of the model that you are trying to solve.
-
Viewing 1 reply thread
- The topic ‘Find conduction path: Multilump bodies found unconnected, please separate them.’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- Y wiring method and the start and end points of winding.
- Lumped Port Deembed
- Optimizing Via Impedance in Ansys HFSS 3D Layout Using Geometric Parameter Sweep
- Hfss 3D pcb via capped and filled with epoxy
- HFSS libnvidia-ml.so too old or could not be found – Warning in slurm job output
- AEDT Natural Convection with default correlation is failing solver initializatio
- Three-Phase Voltage Imbalances in dual stator electric generator
- STL Import Errors in HFSS After Cleaning in SpaceClaim
- Calc Error in Field Calculator after PyAEDT Analyze
- import file autocad 3d
Top Contributors
-
3892
-
1414
-
1256
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.