-
-
March 5, 2024 at 8:58 pm
Jason Huang
SubscriberHello, I would like to run FDE on a ring resonator. I have been able to set up the proper geometric structure of the ring resonator and obtain the eigenmode using FDE analysis. Now I would like to integrate some electric gates across the ring resonator, apply a certain voltage on top of the gates, and see how the previous eigenmodes from FDE would change. Any suggestions on how I could implement the user-defined gate+voltage components into FDE? Thank you!
-
March 7, 2024 at 12:49 am
-
Viewing 1 reply thread
- The topic ‘FDE for Ring Resonator– Duplicate’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- Difference between answers in version 2024 and 2017 lumerical mode solution
- Import material .txt file with script
- Absorption cross-section of AuNR excited by prism-based TIR
- How to measure transmission coefficients on a given plane .
- TE Polarization Fraction + Waveguide TE/TM Fraction
- Edge Coupler EME Example Issue
- Lumerical Python API Topology Optimization Error 2025 R1
- 2D inverse design grating coupler
- FDE : Simulation waveguides with electrodes
- Loss of lithium niobate phase modulator
Top Contributors
-
2427
-
930
-
599
-
591
-
569
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.